Thermal Printing Plates

Lithotechnics DTP 180 - single layer

Non ablative  single layer thermal  positive plate with wide operating latitude, optional postbake for extremely long runs and resistance to aggressive press chemistry as UV inks and blanket washes .Produced from high quality grained and anodized aluminum imported from Germany and Japan, Standard alloy 1052  type / EN AW1052A    

Technical data

Gauge :

0.15mm, 0,20mm ,0,25mm, 0.30mm, 0.40mm

Max. Width :

0.15mm - 490mm  / 0.30mm & 0.40mm  - 1450mm

Spectra Sensitivity :

800nm -850nm ( peak 830nm )

Working environment :

Daylight

 Laser Energy :

120 – 140 mj /cm2

Compatible with all
Thermal CTP devices
  1. KODAK  Trendsetter/Lotem/Magnus
  2. SCREEN PTR Series  8000 and 4000
  3. Heidelberg Suprasetter / Topsetter
  4. AMSKY and CRON

FM  Capability :

20 micron stochastic

Resolution :

1% - 99%  & 250 lpi

Developer

All well-known such as Kodak-Agfa-Fuji –Imaf

Temperature

+/- 230C

Dwell time

25-30sec

Replenishment rate

100-120 ml/m2

Runlength

Up to 100.000 impressions, unbaked & normal Offset inks.       
Up to one million after post baking.
( Actual run length may vary according to press ,ink and paper conditions )

Shelf life

18 months under recommended storage conditions

Transport and storage

Unopened plate boxes should be stored flat and away from excessive cold, heat and humidity.
Use in a controlled environment  10 – 25 0C and RH : 40% - 80 %