CTP DEVELOPER PM-A

Product Usage

Developer for Thermal-Plates (positive working)  - ready to use
CTP DEVELOPER PM-A : Kodak Elektra HRO/ FUJI LH-PCE/ IPAGSA UNIVERSE /Lithotechnics TUV/HUAGUANG TPU

Features and Benefits

  • high buffer capacity in the plate processor - long lasting
  • effective coating protection - long press stability of the plate
  • top up replenishing with low rates - constant developer power
  • Use  for Thermal plates                                            

Packaging

20 liter cans, 200 liter drums,

Directions

Start with the basic adjustment prescribed by the plate manufacturer
Temperature: 22°C-25°C, start with 23°C

Processor speed: 20-40 seconds, start with 28 seconds
Replenishing rate: 100-120ml/m2, start with 100ml/m2
Stand-still replenishing: 120-140ml/hour, start with 120ml/h

Technical Specifications

Density: 1,09 g/cm3
Color: orange/white
Odour: odorless
Water solubility: complete
Flash point: not flamable
Conductivity : 83– 87 mS
PH >13

Storage and Shelf Life

Storage: not under 6°C, not above 40°C
keep container tightly closed
keep away from direct sun light

PRECAUTIONS:

Before using  PM-A developer read carefully the SAFETY DATA SHEET. We suggest to wash the plate processor with SOLVINE CTP cleaner. Rinse carefully to eliminate encrustations which could come off using the product